Click image to view full size image
You have special needs that can be designed for you. The following data is for reference only. Please contact us for more details.
I. Technical parameters
1. specification parameters
| model | thickness（mm） | number PCS | Accuracy (mm) | Speed (m/min) |
| ZFJX | 0.2-1 | Depending on the machine width | ±0.2 | 0-120 |
| ZFJX | 0.5-2 | ±0.2 | 0-120 | |
| ZFJX | 0.5-3 | ±0.3 | 0-120 | |
| ZFJX | 1-4 | ±0.3 | 0-80 | |
| ZFJX | 2-6 | ±0.5 | 0-80 | |
| ZFJX | 3-8 | ±0.5 | 0-50 | |
| ZFJX | 4-8 | ±0.5 | 0-50 | |
| ZFJX | 4-12 | ±0.5 | 0-50 | |
| ZFJX | 4-16 | ±0.5 | 0-50 |
Common width standard：600/800/1250/1600/1800/2000/2200
It is main composed of the following:
1. entry coil car,
2. uncoiler,
3. slitter,
4. scrap coiler,
5. tension unit,
6. recoiler, etc.
Partial description
A. Hydraulic truck
Function description:
Used for upper and lower elevation, horizontal direction function, easy to roll steel import decoiler winding mandrel, lifting table adopts hydraulic transmission level mobile motor driver, the control of the car in the vice operation control button, the car translation speed is 6 to 7 m/min. When the coil is fixed on the open coil, the car returns to its starting position. Unprocessed steel can also be sent back to the starting position using a small car.
Slitting host
Power parts: power seat, reducer, dc speed regulating motor, gear distribution box, coupling, clutch and universal joint.
Host part: by frame, fixed arch, big slider, linear guide, two knife shaft, activity housing, hydraulic mobile mechanism, the slider, before and after regulating mechanism, knife shaft lifting pressure regulator, motor, etc.
Dc motor with dc motor.
The shearing spindle is tested according to the control shaft and the beating accuracy of the wire.
Wuxi Puxin Machinery Factory
Mob: 86-13951579100
Tel: 86-510-83208381
Fax: 86-510-83209882
Add: 76# Qianluo Load, Huishan District,Wuxi,Jiangsu,China
Email: wxpx0510@163.com
Website: http://www.Pxslitter.com